[vc_row][vc_column][vc_column_text]The application of outdoor lighting can be seen everywhere in our life nowadays.
The old-fashioned way to connector wire such as wrap a few layers of insulating glue unable to meet the requirements of outdoor lamps.
You will know how importance of cable glands for outdoor lamps in the article.
Why need the cable glands for outdoor lamps?
The distance from the power supply to the lamp holder is generally large in outdoor lighting systems.
Connected the wires directly together are easily cause disconnection, and the
poor contact of the interface can easily cause heat.
Compared to indoor use, the requirements of waterproof salt, and aging willbe relatively high when lamps are used outdoors.
At this time, cable glands is particularly important.
Not only make the installation of the power grid more easily,
but also will reduced all hidden safety risks to a very low level.
What kinds of cable glands more suitable?
When you choose the cable gland for your outdoor lamps, noted to consider the IP rating.
The IP ratings are defined by the international standard EN 60529
The higher the IP rating is, the higher the light fitting’s resistance against both water and dust.
The cable glands which protection grade can reach IP68 will be a good choice for outdoor lighting equipment.
Moreover, you can use a junction box instead cable glands when you use more than one cable.
The cable glands produced by Jixiang Connector can reduce material costs and installation time, while being environmentally friendly and durable. Welcome to contact us for more details![/vc_column_text][/vc_column][/vc_row]
CCTV Systems are a part of our everyday lives. They are ubiquitous and are found in our homes, on streets, highways, railway stations, trains, museums, cinemas, hospitals and numerous other public places. But the cabling on CCTV Systems is the weakest link of a circuit and is often subject to attack by exposure to the extreme conditions that they are […]
Read More
When you choose a highly protective enclosure, e.g, Junction or terminal boxes, you think you can do it once and for all. In the end it turned out that the internal equipment was still the equipment suffers and rusts. How did the water come from, under such a high level of protection? It’s time to […]
Read More
A breathable cable gland allows air to pass through, which helps to equalize pressure and prevent moisture build-up within an electrical enclosure or housing, can help to improve the lifespan and reliability of the equipment it is installed in. Additionally, breathable cable glands may also make it easier to inspect and maintain the enclosed electrical […]
Read More
