[vc_row][vc_column][vc_column_text]The application of outdoor lighting can be seen everywhere in our life nowadays.
The old-fashioned way to connector wire such as wrap a few layers of insulating glue unable to meet the requirements of outdoor lamps.
You will know how importance of cable glands for outdoor lamps in the article.
Why need the cable glands for outdoor lamps?
The distance from the power supply to the lamp holder is generally large in outdoor lighting systems.
Connected the wires directly together are easily cause disconnection, and the
poor contact of the interface can easily cause heat.
Compared to indoor use, the requirements of waterproof salt, and aging willbe relatively high when lamps are used outdoors.
At this time, cable glands is particularly important.
Not only make the installation of the power grid more easily,
but also will reduced all hidden safety risks to a very low level.
What kinds of cable glands more suitable?
When you choose the cable gland for your outdoor lamps, noted to consider the IP rating.
The IP ratings are defined by the international standard EN 60529
The higher the IP rating is, the higher the light fitting’s resistance against both water and dust.
The cable glands which protection grade can reach IP68 will be a good choice for outdoor lighting equipment.
Moreover, you can use a junction box instead cable glands when you use more than one cable.
The cable glands produced by Jixiang Connector can reduce material costs and installation time, while being environmentally friendly and durable. Welcome to contact us for more details![/vc_column_text][/vc_column][/vc_row]
[vc_row][vc_column][vc_column_text]In a non-static application, if you still using a standard cable gland for your wire. It may cause kinking and chaffing to occur, more seriously, it can damage wires and have a chain of consequences. At this point, you can consider using Strain Relief Cable Glands. Strain Relief Cable Glands means the cable gland designed […]
Read More
Compared with indoor dry environment, making waterproof electrical connections in a wet environment is a lot harder (and more expensive) than it looks. IP68 warterproof connectors also known as IP68 waterproof junction box, could be the perfect soulution. IP68 warterproof connectors good for low voltage, are use in the associated cabling for domestic and commercial […]
Read More
[vc_row][vc_column][vc_column_text]Selection of the right cable gland, a small decision as it may seem, can have a far-reaching impact on the entire project. Do you have such a question: Should I choose BW or CW Cable Glands? There have many common point between BW and CW Cable Glands: Both the BW and CW Cable Glands are used to […]
Read More
